top of page
  • What is the diameter of diamond wire?
    Specifications Type Outer-Ø (mm) Grain size (µm) DW.080-L 0,08 - 0,085 10 - 12 DW.150-L 0,13 - 0,15 15 - 20 DW.200-L 0,18 - 0,20 20 - 30 DW.250-L 0,23 - 0,26 30 - 40
  • What is diamond cut wire?
    Diamond wire cutting (DWC) is the process of using wire of various diameters and lengths, impregnated with diamond dust of various sizes to cut through materials. Because of the hardness of diamonds, this cutting technique can cut through almost any material that is softer than the diamond abrasive.
  • Can diamond wire cut wood?
    Advancements in new high speed diamond wire cutting machines have made this process suitable for wood machining. A diamond wire saw cuts a smooth surface. The stainless steel wire is crimped with synthetic diamonds which produces a pure cut (similar to a waterjet).
  • Can a wire saw cut through metal?
    The saw can be used for precision cutting of semiconductors, ferrites, metals, glasses, minerals as well as many other hard or brittle solids.
  • How do you calculate wire cut time?
    As shown in the formula below, cutting time can be found by ℓm (workpiece length) ÷ ℓ(cutting length per minute). Example: When cutting length per min is 20mm and workpiece length is 100mm; 100÷20=5. Cutting time is 5 minutes.
  • What is the HS code for Diamond cutting wire?
    Diamond Wire Saw Import Data under HS Code 82089090 with Price.
  • What is the speed of diamond wire saw cutting?
    between 24 and 30 m/s The cutting action of a diamond wire consists in pulling a properly pre-tensioned wire saw across the stone block at a linear speed of between 24 and 30 m/s, and simultaneously lowering it at a down-feed rate tailored to meet the optimum combination of productivity and wire life.
  • What is diamond wire made of?
    The rope used on an industrial diamond wire saw machine is a made from a loop of high tensile steel connected by a mechanical joiner. On the outside of the rope are carrier rings, on which diamonds are either sintered or retained by an electroplated layer.
  • What are the disadvantages of wire cutter?
    The wire itself also suffers damage, so the EDM machine must constantly feed new wire. Depending on the metal being cut, another disadvantage of wire EDM cutting is that an oxide layer can form on the cut surface. This may require secondary cleaning, which adds to cost.
  • What is the HSN code for diamond wire saw rope?
    Diamond Wire Rope Import Data under HS Code 82071900 with Price.
  • How do you use a diamond wire saw?
    How does a diamond wire saw work? Wire saws are most comparable in principle to that of a reciprocating saw or bandsaw. The Diamond wire is placed around a material that needs to be cut, or threaded through a bore hole, and is then run at speed to utilise abrasion to effectively cut through slab or reinforced steel.
  • What method of cutting does a wire saw use?
    Wire saw systems rely on a series of guided pulleys to draw a continuous loop of diamond impregnated wire through otherwise impenetrable material. This technology creates any desired shape or directional cut with ease.
  • How Diamond Wire Saws Work
    The Diamond wire is placed around a material that needs to be cut, or threaded through a bore hole, and is then run at speed to utilise abrasion to effectively cut through slab or reinforced steel. This method can produce a lot of heat and needs cooling so it can be used.
  • Can diamond wire cut steel?
    Steelcut diamond wire is ideal for cutting metal and heavy-reinforced concrete in a range of industrial and civil applications. The wire allows to make cuts in reinforced concrete sections, ensuring a clean and vibration-free operation so protecting the surrounding structures.
  • What is the process of diamond wire saw?
    Diamond wire cutting (DWC) is the process of using wire of various diameters and lengths, impregnated with diamond dust of various sizes to cut through materials. Because of the hardness of diamonds, this cutting technique can cut through almost any material that is softer than the diamond abrasive.
  • What speed does diamond wire cut?
    The diamond wire cutting tool travels at a relatively slow rate of speed, which is continuously adjustable up to 2.5 meters per second. This low rate of speed helps ensures a gentle cutting action as well as makes the "blade" safe to the touch while the cut is in process.
  • What is the composition of diamond wire?
    Diamond wires are cutting tools for rocks (marble, granite etc.), concrete and substitutes of saws in general (1-5). They are composed of an AISI 316 stainless steel cable over which are assembled diamond sintered pearls with 10 to 12 mm in diameter spaced 25 mm between each one.
  • How thick is wire cut machine wire?
    A wire of 0.1 to 0.3mm in diameter is typically used. The metal to be machined is melted and cut by the discharge, but the wire is partially consumed at the same time, as a discharge trace is formed. (The trace is created when the wire surface melts and splatters.)
  • What is a wire saw used for?
    Wire saws can be used to cut through concrete walls, floors, slabs, and other thick materials. They are often used in demolition projects or to make openings for doors, windows, or vents. Wire saws can also be used to cut pipes, rebar, and other metal objects embedded in concrete.
  • What is the cutting width of a diamond wire saw?
    The diamond wire saw type is a table saw in horizontal design so that the smallest cut-offs can be observed with the naked eye or also by means of an attached microscope. The maximum workpiece cutting area is 90 x 90 mm and the recommended diamond wire thickness is 0.08 to 0.35 mm.
  • Can diamond wire cut steel?
    Steelcut diamond wire is ideal for cutting metal and heavy-reinforced concrete in a range of industrial and civil applications. The wire allows to make cuts in reinforced concrete sections, ensuring a clean and vibration-free operation so protecting the surrounding structures.
  • Does wire diameter matter?
    The larger the cross-section of a wire, the less its resistance. Also, the larger the cross-section, the greater the amount of current (amperage) the wire can safely carry before overheating. A wire with a smaller gauge (larger diameter) can carry more power than one with a larger gauge.
  • How do I add a new question & answer?
    To add a new FAQ follow these steps: 1. Manage FAQs from your site dashboard or in the Editor 2. Add a new question & answer 3. Assign your FAQ to a category 4. Save and publish. You can always come back and edit your FAQs.
  • How do I edit or remove the 'Frequently Asked Questions' title?
    You can edit the title from the FAQ 'Settings' tab in the Editor. To remove the title from your mobile app go to the 'Site & App' tab in your Owner's app and customize.
  • Can I insert an image, video, or GIF in my FAQ?
    Yes. To add media follow these steps: 1. Manage FAQs from your site dashboard or in the Editor 2. Create a new FAQ or edit an existing one 3. From the answer text box click on the video, image or GIF icon 4. Add media from your library and save.
bottom of page